Sign In | Join Free | My burrillandco.com
Home > Triac Dimmable LED Driver >

ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output

Shenzhen Merrytek Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output from wholesalers
     
    Buy cheap ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output from wholesalers
    • Buy cheap ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output from wholesalers
    • Buy cheap ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output from wholesalers

    ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output

    Ask Lasest Price
    Brand Name : Merrytek
    Model Number : ML50C-PV
    Certification : SEMKO /CE /RoHS
    Price : Negotiation
    Payment Terms : T/T or western Union or PayPal
    Supply Ability : 10,000pcs per month
    Delivery Time : 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
    • Product Details
    • Company Profile

    ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output

    ML50C-PV 1x50w 0-10V and push dimmable led driver 350mA to 1050mA multi-output 123x79x23.5mm for LED Panel Light


    Feature

    1, Output current and output voltage can be set by DIP switches, constant output current range from 350mA to 1050mA

    2, Two circuit design AC-DC-DC, no flicckering in dimming 2%-100%

    3, Stand-by power below 0.5W

    4, Dimmable LED driver with primary PUSH, secondary PUSH and 1-10V dimming interface

    5, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required

    6, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores

    7, Synchronization: thanks to the MCU programme, up to 15pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch

    8, Maximum length of the cable, from switch to last driver is 20m

    9, Factory setting: 100% dimming level and 350mA output

    10, Dim via a potentiometer

    11, Support master-slave grouping net work

    12, Protection: Short circuit / Over voltage / Over temperature

    13, Long life span 50,000h, 5 years guaranty

    14, Derating current for over high ambient temperature


    Mechanical Specification


    ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output

    Dimming Operation:

    1.Push button switch for dimming (see wiring diagram, Fig A & Fig B)

    • ON/OFF: Short push (120ms ~ 1sec) on the switch
    • Stepless dimming: Long push (>1sec) on the switch. With every other long push, the light level goes the opposite direction.
    • Synchronization: No need additional synchrony wire in larger installation, up to 15pcs drivers when connected to the same switch.

    2.1-10V dimming (see wiring diagram, Fig C)

    The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig C


    Specifications


    INPUT


    Input voltage220-240Vac
    Input frequency50-60Hz
    Input current0.26A max
    Power factor (Note 1)≥0.90
    Efficiency(Note1)≥86%
    Stand-by power (Note 2)≤0.5W

    OUTPUT


    Output current/ voltage

    350mA 6~60V DC 21W max.; 500mA 6~58V DC 29W max

    550mA 6~58V DC 31.9W max.; 650mA 6~58V DC 37.7W max.

    700mA 6~58V DC 40.6W max.; 750mA 6~56V DC 42W max

    850mA 6~56V DC 47.6W max.; 900mA 6~56V DC 50.4W max

    1050mA 6~48V DC 50.4W max.

    12V (0~1050mA) 12.6W max.; 24V (0~1050mA) 25.2W max.

    Output load range50.4W Max.
    Current accuracy±5%
    Dimming mode1-10V, PUSH

    ENVIRONMENT


    Working temp.(Ta)-20~50℃
    Surface temp.(Tc)85℃max
    Working humidity20~85%RH non-condensing
    Storage temp.-40~80℃
    Life time≥50000hours

    PROTECTION


    Isolation classClass Ⅰ
    Protection classIP20
    Over voltage300Vac, 2H
    Short circuitProtection type; auto reset
    No-loadProtection type; auto reset
    Over temperatureProtection type; auto reset

    OTHERS


    SafetyEN61347-1 EN61347-2-13
    EMCEN55015, EN61000-3-2
    EN61000-3-3, EN61547
    ApprovalsSEMKO, CE, RoHS
    Withstand voltageIN-OUT:3.75KVAC/5mA/1min
    Dimension (L x W x H)123x79x23.8mm
    Connection

    Press-in type terminals, 0.75-1.5mm2

    Input: L, N, PUSH, PE

    Output: SEC(+) SEC(-), 1-10V(+),1-10V(-)


    NOTE

    Note:

    1, Power factor and efficiency is detected at 230Vac input and full load.

    2, Standby power is detected at 230Vac input and switch off led load by push button.

    Applications

    For LED panel light, LED down light, led strip, led tube etc…


    Wire diagram


    Quality ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shenzhen Merrytek Technology Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)