| Sign In | Join Free | My burrillandco.com |
|
| Ask Lasest Price | |
| Brand Name : | Merrytek |
| Model Number : | MC130 |
| Certification : | CE, RED, UKCA, SAA, CB |
| Price : | Negotiable |
| Payment Terms : | T/T |
| Supply Ability : | 10000 pcs/month |
| Delivery Time : | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 4-5 weeks after receiving deposit. |
【Product Feature】
【Parameter】
| Input | |
| Rated Voltage | 220-240VAC 50/60Hz |
| Stand-by Power | ≤0.5W |
| Surge Test | L--N: 1kV |
| Output | |
| Output Control | ON-OFF |
| Load Capacity | 200W(Inductive/LED) ; 400W(Resistive) |
| Max. Surge Capacity | 10A relay: 30A (50% Ipeak, twidth =200us, 230Vac full load, cold start); |
| Sensor Parameter | |
| Operating Frequency | 5.8 GHz ±75MHz, ISM wave band. |
| Transmitting power | 1mW Max. |
| Detecting Radius | r≥3m @ ceiling mounting, r≥8m @ wall mounting Motion speed: 1m/s, 100% sensitivity, 165cm person. |
| Mounting Height | 2.5-5m (ceiling mounting), 2-3m (wall mounting) |
| Environment | |
| Operating Temperature | -25~60°C |
| Storage Temperature | -40℃~80℃, Humidity: ≤85%(Non-condensing) |
| Certificate Standard | |
| Certificate | CE, RED, UKCA, SAA, CB |
| Environmental Requirement | Compliant to RoHS 2.0, Reach |
| IP Rating | IP20 |
| Other | |
| Wiring | Press-in type terminal block, wiring 0.5-0.75mm2 |
| Installation | Built-in |
| Package | Bubble bag + Clapboard + Carton(K=A) |
| Net Weight | 36g±3g |
| Lifetime | 5 years warranty @Ta |
【Function】
| ON-OFF function | Setting daylight sensor to “disable” or ambient brightness is lower than the preset daylight sensor value, when detecting moving signals sensor starts working and light will turn on. When hold time ends, light will turn off. |
| □2-step dimming | N/A |
| □3-step dimming | N/A |
| □Daylight harvesting | N/A |
| □Daylight priority | N/A |
【Product Information】
Wiring and Function diagram

*The sensor is designed for connect one load only. Connect more than one loads may damage the sensor.
【Installation Instruction】Recommended for use on ceiling lights

Note: Please check the sensor installation method with Merrytek before design any luminaire.

【DIP Switch Setting】
Sensor should be installed by a professional electrician. Please
turn off power before installing, wiring, or setting the DIP
switches.
|