Sign In | Join Free | My burrillandco.com
Home > Presence Detectors Sensor >

KNX approved 5.8GHz high frequency detector ON/OFF motion detector with 5-year warranty

Shenzhen Merrytek Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap KNX approved 5.8GHz high frequency detector ON/OFF motion detector with 5-year warranty from wholesalers
     
    Buy cheap KNX approved 5.8GHz high frequency detector ON/OFF motion detector with 5-year warranty from wholesalers
    • Buy cheap KNX approved 5.8GHz high frequency detector ON/OFF motion detector with 5-year warranty from wholesalers
    • Buy cheap KNX approved 5.8GHz high frequency detector ON/OFF motion detector with 5-year warranty from wholesalers

    KNX approved 5.8GHz high frequency detector ON/OFF motion detector with 5-year warranty

    Ask Lasest Price
    Brand Name : Merrytek
    Model Number : MSA237K 99 D
    Certification : CE
    Price : Negotiation
    Payment Terms : T/T
    Supply Ability : 10000 pcs/month
    Delivery Time : 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
    • Product Details
    • Company Profile

    KNX approved 5.8GHz high frequency detector ON/OFF motion detector with 5-year warranty

    KNX approved 5.8GHz high-frequency detector ON/OFF motion detector with 5-year warranty


    1. Parameters

    Input/OutputKNX bus voltage21-30V DC
    KNX bus current8±1mA
    Sensor ParameterWorking Frequency5.8GHz±75MHz
    Transmitting Power5mW Max
    Detection AreaETS setting: 1%-100%
    Hold TimeETS setting:3S-7200S

    Detecting Range

    (100% detection area, radius)

    Major movement(3m height installation): 3.5±0.5m(based on 41㎡ open area test and might change due to different space and different people)
    Remote ControlSupport
    Mounting Height2-4m, typical value: 3m
    3db Beam Angle90°(XZ field)
    95° (YZ field)
    Application environmentFlush-mounted Hole SizeΦ50-55mm
    Working Temperature0℃...+50℃
    Storage Temperature-40℃...80℃, Humidity: ≤85%(non-condensing)
    Certificate StandardCertificateFCC/RED
    Environmental RequirementCompliant with RoHS
    IP RatingIP20
    Guarantee3 year(only for product quality problem under indoor application)
    “N/A” means not available

    2. Product Function



    3. Dimension


    4. Wiring


    Wiring layout suggestion:

    1. KNX bus wiring suggestion hand in hand to the end, star or tree wiring is not recommended to ensure the stability of signal transmission.

    2. KNX bus wiring recommends KNX standard EIB shielded wire or Category 6 network cable; the length of the bus wiring is recommended not to exceed 400 meters, and the number of sensors connected to a bus is recommended not to exceed 12.

    3. The number of sensors connected to a bus needs to fully consider the current load capacity of the power supply, which means the sum of the currents of all KNX devices (including sensors) shall not be greater than the load current of the KNX power supply.


    5. Detection Range


    6. Initialization

    After routing the physical addresses and setting the channel parameters, follow these steps:

    (1) Connect Bus interface;

    (2) Set Bus and auxiliary power on (note: please make sure that the product has an auxiliary power supply, otherwise the device may not work properly);

    (3) Press the programming switch of the product, and the LED light will turn red.

    (4) Use the bus interface to download the physical address through the ETS software. The programming LED light is off to indicate that the physical address download is successfully completed.

    (5) Download the application after setting the required application parameters.

    (6) After downloading the application, the product goes into initialization. During initialization, the detection function is disabled. After 20S, the initialization is completed, and the product works normally.

    Note: Please use the latest version of ETS 5 or 5.7.2. Please obtain the ETS engineering configuration file of this sensor from our sales staff.


    7. Factory Default Setting

    Detection Area: 100% Hold Time: 5S Indicator Light: open


    8. Remote Control MH18


    Due to the complexity of product technology and differences in application environment, it is difficult to guarantee a completely accurate or complete description, so this specification is only for user reference.

    We will reserve the right to make changes to the product specifications without notifying the user, and do not make any commitments and guarantees in the legal sense.At the same time, our company encourages users to supplement or modify the contents of our specifications after using our products.

    Quality KNX approved 5.8GHz high frequency detector ON/OFF motion detector with 5-year warranty for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shenzhen Merrytek Technology Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)